Pagina's

zaterdag 31 mei 2014

Voor Christa


En als alles goed is gegaan (en dat hoop ik!!), dan heeft Christa mijn envelopje al open gemaakt en heeft ze dit kaartje al gezien. Op 4 juni gaat ze Sarah zien en heeft ze al een heleboel leuke kaartjes en andere creaties gekregen. Mijn kaartje is niet echt een ''Sarah'' kaartje, ik heb van die grappige stempels niet, maar ik hoop toch dat ze hem leuk vindt, ik heb hem in ieder geval met veel liefde gemaakt. Weer een La La Land Crafts Kimono Marci gebruikt, papier van KaiserCraft en MFT Die-namics Trellis and Vine.
Een heel fijn weekend, en bedankt weer voor het bezoek en de leuke reacties.

Another lovely LLLC stamp, Kimono Marci with Fan. I've made the card for my blog friend Christa, who will turn 50 next week. I used the same paper pad as on my previous card. And the same MFT Die-namics Trellis and Vine and MFT Die-namics LJD Rustic Hearts as well. To decorate the inside I used MFT Die-namics Blueprints 13 (the Washi Tape piece) and Die-namics By the Numbers.
Thank you again for stopping by and the lovely comments.



donderdag 29 mei 2014

Especially...




Dit kaartje is een verrassing voor een vriendin. Ik ben een beetje dol op deze La La Land Crafts Kimono Marci stempels (stempels, omdat er meer zijn, allemaal even schattig), ze zijn echt leuk om in te kleuren. Ik had dit papier nog liggen (een oude Card Art kit van Carmen), en ik vond de MFT Die-namics Trellis and Vine mooi hier bij passen.
Bedankt weer voor het bezoek en de leuke reacties.

I've made this card lately to surprise a friend, I hope she likes it. The stamp is the lovely LLLC ''Kimono Marci with Umbrella'', the papers come from an older KaiserCraft paper pad - English Rose Collection - and I made the only ''embellishment'' using the MFT Die-namics Trellis and Vine.
Thank you again for stopping by and the lovely comments.


maandag 19 mei 2014

Made for You


Voor een jonge dame, die mijn kaartjes leuk vind. Een ''Saturated Canary'' digitale stempel gebruikt en weer het mooie Maja Design papier.
Bedankt weer voor het bezoek en de leuke reacties.

This card is on its way to a young lady. I used ''A new canvas'' by Krista Smith and the beautiful Maja Design paper pad.
Thank you again for stopping by and the nice comments.


woensdag 14 mei 2014

Robots


 

Weer alleen maar Die-namics gebruikt en deze twee kleine treat bags met robots gemaakt. Ik heb de gekste dingen gebruikt (bijv. de barbeque uit het setje ''Roughing It'' als ''hoedje'' op het hoofdje van de bovenste robot) en ik vind ze heel erg leuk geworden. Het papier is van Echo Park Paper - ''A Boy's Life'' collectie.
Bedankt weer voor het bezoek en de leuke reacties.

With my favourite dies - Die-namics - I've made these two treat bags, using a lot of tiny little dies from different sets; even the ''marshmallows'' and the barbeque from the set ''Roughing It'' or the cameras from the ''Cute Cameras'' set and the letter ''T'' from the set ''By the Letters Uppercase'' to make the legs of the first robot etc. etc. etc. They are sweet, aren't they?
Thank you again for stopping by and the lovely comments.

zaterdag 10 mei 2014

Baby Boy banner



Deze slinger heb ik ook gemaakt, als eerste eigenlijk, maar ik vond de foto's waardeloos en ik kan ze ook niet bewerken, want de kleur van het cardstock klopt niet meer. En de slinger is al weg. Maar toch laat ik hem zien. Ik het echt is hij veel mooier. Degene die hem heeft besteld wilde speelgoed erop hebben. Ik heb gekeken in mijn doos met Die-namics en vond het bootje, het vliegtuigje en de vlieger en de Lego blokjes op het vierde vlaggetje heb ik zelf gemaakt.
Een fijne moederdag en bedankt weer voor het bezoek en de leuke reacties, ook op Facebook, zo leuk om te lezen!

I'd like to share the Baby Boy banner as well, but I apologize for the quality of the photos; the banner is much nicer in ''real life''! I used only Die-namics (Jumbo Fishtail Banner STAX, Fishtail Flags STAX, Jumbo Cloud STAX, Fly a Kite, Airplane Greetings, Sailboat, Button Border, Oh Baby, LLD Lead the Way) and I also made some Lego pieces myself and used them on the fourth flag.
Thank you again for stopping by and the lovely comments.




P.S.  By request, this is how I made the two-by-three Lego ''bricks''. To give the brick a 3D-look, you need to cut out 24 of those tiny little circles (I used one of My Favorite Things ''Cute Cameras'' die), so you need 4 for each stud. The rectangles are 3,3x2,3cm and I used 4 of them for my ''brick'':



vrijdag 9 mei 2014

Baby Girl banner




Hallo lieve dames, een hele rustige dag vandaag (de auto aan mijn man geleend en Stefanie heeft afgesproken; gelukkig heb ik mijn hobby!), dus een blogpost toch gepland, om een baby slinger te laten zien, die ik op bestelling heb gemaakt. De opdracht was: een slinger van 5 vlaggetjes, met de naam van de baby erop. De rest moest ik zelf bedenken. Nou, 5 vlaggetjes en 4 letters maar, zoals jullie kunnen zien, dan maar iets anders ''verzinnen'' dan elke letter apart op een vlaggetje. Alles is gemaakt met Die-namics en ik heb weer de mooie paper pad van Eline gebruikt.
Een heel fijn weekend allemaal en bedankt weer voor het bezoek en de leuke reacties.

Hi ladies, I'm back on my blog with this baby banner, a commission; I had to use the little girl's name on it and five ''flags''. So this is what I've come up with, using only Die-namics (Jumbo Fishtail Banner STAX, Fishtail Flags STAX, Stitched Circle STAX, Oh Baby, Baby's Bib, Baby Onesie, Button Border, Staggered Heart Border, By the Letters Uppercase, By the Letters) and again the beautiful ''Hello Sweet Baby'' paper pad, designed by Eline Pellinkhof.
Have a nice weekend and thank you again for stopping by and the lovely comments.





P.S. This is how I made the stitched border (around the neck):